Low-Voltage CMOS Capacitor-Less LDOs: Bulk-Driven Versus Gate-Driven Comparative Study

This paper explores the feasibility of a capacitor-less (CL) low-dropout (LDO) regulator to operate efficiently in a low-voltage environment. The CL-LDO scheme selected is based on a unity-gain feedback configuration around the error amplifier (EA), so that the inclusion of high-value on-chip resistors is avoided and different key parameters, such as the power supply rejection or the noise, are optimized. A comparative analysis has been carried out over the same LDO structure including a bulk-driven and a gate-driven EA, respectively. The pass branch of the voltage regulator is provided with pseudo-class-AB operation, in order to lead to a very small quiescent current in the standby operation mode, whereas a very large current can be delivered to the load when required. Both regulators were designed and fabricated in 180 nm CMOS technology to operate with a maximum supply voltage of 1.8 V. The extensive experimental characterization showed that the bulk-driven LDO can achieve a significantly lower minimum supply voltage, i.e., 0.6 V, as compared to the gate-driven counterpart, 1 V, under the same reference voltage and load current conditions.

keywords: Bulk-driven MOS, Capacitor-less LDO, Low-power, Low-voltage, Voltage regulator